Optical
Duct | Unarmoured Cable
Indoor Cables
All Dielectric Self Supporting Cables
Armoured Cables
Drop Cables
Interconnect Cables
FTTH Cables
Figure-8 Cables
Micro Duct Cables
Splitters & Couplers
PLC Splitter with Connector
PLC Splitter without Connector
PLC Splitter ABS Type
PLC Splitter PLC (Cassette) SC/UPC
Ratio Coupler
FTTH Patch Cords
1F - 2 Steel +1 Support Steel Wire
1F - 2-FRP - 1 Support Steel Wire
Optical Patch Cords
SC/APC - SC/APC
SC/UPC - SC/UPC
SC/APC - SC/UPC
LC/APC - LC/APC
LC/UPC - LC/UPC
LC/UPC - SC/UPC
LC/APC - SC/APC
Simplex Single Mode
Simplex Multi-Mode
Duplex Single Mode
Duplex Multi-Mode
CPRI
Fullaxs DLC Ericsson
PDLC DLC
Spiral Fanout
NSN Boot NOKIA
MPO
MPO Cables
Copper
UTP 24 AWG PE Outdoor Cable (0.50mm)
Copper (0.55mm) - UTP
RG-6
RG-11
Active
Access Point
POE Switches
4-Port 65W
8-Port 120W
16-Port 250W
24-Port 320W
UPS
Multiple Output UPS DRU-8000
Gpon-ONT
DRC 1GE+1FE+1POTS+WiFi
2GE+1POTS+AC WiFi
Housing Solution
Fibre Distribution Box
Joint Enclosure - Tiffin Box
FTTH Termination Box
Wall Mount FMS
24F - Wall Mount FMS
48F - Wall Mount FMS
96F - Wall Mount FMS
Rack Mount FMS 
24F - Dome Unloaded Bamboo Type
Dome Type Optical Fibre Enclosure 
24F - Dome Unloaded Bamboo Type
48F - Dome Unloaded Bamboo Type
96F - Dome Unloaded Bamboo Type
Accessories
SFP Transceivers 
1G Single Fibre
10G Single Fibre
1G Dual Fibre
10G Dual Fibre
1G Copper
10G Copper
40G QSFP
100G QSFP
1G CWDM
10G CWDM
EPON PON Module
GPON PON Module
Multifunction Adpter DCH - 100
Multifunction Adpter DCH - 300
Multifunction Adpter DCH - 800
RJ45 Connectors
FC, LC, SC Fibre Connectors
SC | UPC
SC | APC
Sleeves 
Fibre Sleeves 60mm
Softwares
Dr.Wan (SD-WAN)
Dr.Biig (Broadband Internet Intelligent Gateway)
Tested Beyond Expectations: Why Fluke-Tested CAT6 Cables Matter
When building a network, reliability starts with the cable.
Whether you're installing CCTV cameras, Wi-Fi access points, IP phones, or enterprise networks, poor-quality cables can lead to signal loss, unstable connections, and unreliable PoE performance.
That's why testing matters.
What Is Fluke Testing?
Fluke Networks is one of the world's most trusted cable testing standards.
A Fluke-tested cable is verified for key performance parameters such as:
- Signal Quality
- Crosstalk Performance
- Return Loss
- PoE Capability
- Network Reliability
This helps ensure the cable performs consistently in real-world installations.
Fluke 90m High Temperature Tested
Network cables are often installed in environments where temperatures can rise significantly.
DR-COM CAT6 Copper Cables are tested in Fluke 90-meter permanent link configurations to verify stable performance under demanding conditions.
Benefits
Fluke 100m PoE Tested
Modern networks depend heavily on PoE devices such as:
- CCTV Cameras
- Wireless Access Points
- IP Phones
- Access Control Systems
DR-COM CAT6 Copper Cables are Fluke tested over a 100-meter channel while supporting 57V / 1A DC PoE operation.
Benefits
Built With 99.95% Bare Copper
The quality of a network cable starts with its conductor.
DR-COM CAT6 cables use 99.95% solid bare copper conductors for lower resistance and improved transmission performance.
Benefits
Standards You Can Trust
DR-COM CAT6 Copper Cables comply with internationally recognised standards including:
- ANSI/TIA-568.2-D
- ISO/IEC 11801
This ensures reliable and consistent network performance.
Why Choose DR-COM CAT6 Copper Cables?
Conclusion
Many cables may look the same from the outside, but performance is proven through testing.
With Fluke-verified performance, pure copper conductors, and compliance with international standards, DR-COM CAT6 Copper Cables are built to deliver dependable connectivity for modern networks.
Because reliable networks start with cables that are tested beyond expectations.